ISO 7093

Plain washers – Large series – Product grades A and C

English 1983
0.000
ISO
Detailed Information

This International Standard lays down the specification for plain washers of product grades A and C with outside diameter three times nominal size (nominal thread diameter), preferable for hexagon bolts, screws and nuts with width across flats according to ISO 272, with thread sizes from M 3 to M 36 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7965
1965
English

Screwed Inserts (Screw Plugs)

These screwed inserts are intended primarily for screwing into wood or wood-like materials.
SAE
SAE J81
1997
English

THREAD ROLLING TAPPING SCREWS

This standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that "thread rolling" screws have performance capabilities beyo [...]
ASTM
ASTM F879
2010
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread 0. [...]
DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical condi [...]
ASTM
ASTM A368
2009
English

Standard Specification for Stainless Steel Wire Strand

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes. 1.2 The value [...]
DIN
DIN 6906
1972
English

Lock Washers for Screw Assemblies

Toothed lock washers according to this Standard are intended only for screw assemblies according to DIN 6900.
DIN EN
DIN EN 28745
1992
English

Half-length taper grooved pins (ISO 8745 : 1986) English version of DIN EN 28 745

This International Standard specifies the characteristics of half-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metr [...]
DIN
DIN 968
1994
English

Cross recessed pan head tapping screws with collar

This standard specifies requirements for ST 2,9 to ST 6,3 cross recessed pan head tapping screws with collar. See DIN 962 (or the standards referred to therein) for special screw types or finishes.
SAE
SAE J2044
2009
English

Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems

This SAE Recommended Practice defines the minimum functional requirements for quick connect couplings used for supply, return, and vapor/emission fuel system connections. This document also def [...]