DIN 936

Hexagon Thin Nuts (Old Type)

English 1976
0.000
DIN
Detailed Information

Hexagon nuts according to this Standard are still specified for a period not as yet determined for replacement needs and for existing designs only.

For new designs, hexagon nuts according to DIN 439 are recommended which conform with the conclusions of Technical Committee ISO/TC 2 “Fasteners” of the International Organization for Standardization (ISO).

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainless s [...]
JIS
JIS B 1001
1985
English

Diameter of clearance holes and counter bores for bolts and screws

This Japanese Industrial Standard specifies the diameters of clearance holes, hereinafter referred to as the "bolt hole diameters", and the diameters of counterbores for bolts, machine screws, [...]
DIN
DIN 934
1987
English

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply [...]
DIN EN
DIN EN 28676
1992
English

Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diame [...]
ASTM
Abstract of ASTM A563M
1996
English

CARBON AND ALLOY STEEL METRIC NUTS

This specification covers chemical and mechanical requirements for eight property classes of hex and hex flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, [...]
DIN
DIN 101
1993
English

Rivets – Technical delivery conditions

This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized rivets (except for blind rivets). These specifications are generally [...]
JIS
JIS B 1083
1990
English

General rules for tightening of threaded fasteners

This Japanese Industrial Standard specifies general matters relating to significance of tightening by combination of bolt and nut, basis of tightening and representative control method. Furthe [...]
DIN
DIN 1479
1998
English

Hexagon turnbuckles

This standard specifies dimensions and technical delivery conditions for sizes M6 to M30 hexagon turnbuckles with widths across flats as in ISO 272, of product grade A and made of steel or aust [...]
DIN EN
DIN EN 28752
1993
English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.