DIN 267-12

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

English 1971
0.000
DIN
Detailed Information

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons for adopting different arrangements in individual cases.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 267-12
1971
English

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons [...]
ASME
ASME B18.5.2.3M
1998
English

ROUND HEAD SQUARE NECK BOLTS WITH LARGE HEAD [METRIC SERIES]

This standard covers the complete general and dimensional data for metric series round head square neck bolts with large head recognized as American National Standard.
DIN EN
DIN EN 10277-3
1999
German

Blankstahlerzeugnisse – Technische Lieferbedingungen Teil 3: Automatenstähle – Deutsche Fassung EN 10277-3 : 1999

1.1 Dieser Teil von EN 10277 gilt für blanke, gerade Stäbe aus Automatenstählen Im gezogenen, geschälten oder geschliffenen Zustand. 1.2 Diese EN 10277-3 wird vervollständigt durch EN 10277-1.
DIN
DIN 6916
1989
English

Round washers for high-strength structural steel bolting

The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.
ASTM
Abstract of ASTM F879M
1991
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread [...]
IFI
IFI-126
2008
English

BREAK MANDREL CLOSED END BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel closed end blind rivets suitable for use in joining the component parts of an as [...]
ISO
ISO 1483
1983
English

Slotted raised countersunk (oval) head tapping screws (common head style)

This International Standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
JIS
JIS B 0202
1999
English

Parallel pipe threads

This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc. The parallel inter [...]
JIS
JIS B 0101
1994
English

Screw threads and fasteners — Vocabulary

This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw th [...]