DIN 964

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

English 1970
0.000
DIN
Detailed Information

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps.

Normally these screws are manufactured in the sizes characterized by the quoted weight. If the screws are to be supplied with captive washer components, an addition is made to the designation according to DIN 6900.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7969
1989
English

Slotted countersunk head screws for structural steel bolting for supply with or without nut

This standard specifies requirements for M10 to M24 slotted countersunk head screws assigned to product grade C for use in structural steel bolting.
JIS
JIS B 0176-4
2002
English

Threading tools—Vocabulary Part 4 : Thread rolling dies

This part of JIS B 0176 specifies terms and definitions related to thread rolling dies to be used mainly for metal workings in general.
JIS
JIS B 1129
2004
English

Tapping screw washer assemblies with plain washers

This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in acc […]
JIS
JIS B 0212
1973
English

Limits of sizes and tolerances for unified fine screw threads

This Japanese Industrial Standard specifies limits of sizes and tolerances for unified fine screw threads specified in JIS B 0208-Unified Fine Screw Threads, mainly used for the purpose of fastening.
DIN
DIN 1816
1971
English

Round Nut with Set Pin Holes Inside – ISO Metric Fine Thread

Material (strength properties): at least 5 according to DIN 267 Part 4
DIN
DIN 4000-9
1986
English

Tabular layouts of article characteristics for bolts, pins, rivets, and keys

This standard specifies tabular layouts, in accordance with DIN 4000 Part 1, for standardized and non-standardized bolts, pins, rivets, and keys.
DIN
DIN 604
1981
English

Flat countersunk nib bolts

This standard specifies flat countersunk nib bolts with metric threads M 6 to M 24 of product grade C.
ASTM
ASTM F812/F812M
1997
English

Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal […]
ISO
ISO 724
1993
English

ISO general-purpose metric screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.