DIN 6330

Hexagon nuts with a height of 1,5 d

English 1991
0.000
DIN
Detailed Information

This standard specifies hexagon nuts designed for use with bolts in assemblies that will be frequently disassembled and reassembled. They are provided with a spherical bearing face which, in conjunction with a 120° countersink or a conical seat as specified in DIN 6319, permit any displacements of clamping elements to be compensated.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1123
1996
English

Hexagon head tapping screws

This Japanese Industrial Standard specifies the steel hexagon head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
IFI
IFI-113
2007
English

STEEL SELF-DRILLING TAPPING SCREWS

1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ens [...]
DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 [...]
ASME
ABSTRACT OF ASME B1.2
2007
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for the th [...]
DIN EN
DIN EN 1663
1998
English

Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043 : 1997, modified) English version of DIN EN 1663

This European Standard specifies the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and coarse threads from M5 to M20 inclusive, in product [...]
DIN
DIN 938
1995
English

Studs – with a length of engagement equal to about 1 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in steel. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk [...]
DIN
DIN 7965
1965
English

Screwed Inserts (Screw Plugs)

These screwed inserts are intended primarily for screwing into wood or wood-like materials.
ASME
ASME Draft B18.2.4.1M
1999
English

METRIC HEX NUTS, STYLE 1

This standard covers the complete general and dimensional data for metric hex nuts, Style 1, recognized as American National Standard.
ISO
ISO 887
1983
English

Plain washers for metric bolts, screws and nuts – General plan

This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. [...]