Check out other specifications
2004
English
Thread run-outs and thread undercuts for ISO metric threads as in DIN 13-1
This standard specifies dimensions for thread run-outs and thread undercuts for bolts, screws and similar components with external or internal ISO metric (coarse or fine pitch) thread as in DIN 13-1 and DIN ISO 261.
1998
English
THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS
This standard covers the complete general and dimensional data for the various types of slotted and recessed head tapping screws and metallic drive screws recognized as "American National Standard." Also included are appendixes which provide specifications and instructions for protrusion gaging o...
1981
English
Circlips (retaining rings) for shafts – Normal type and heavy type
Circlips within the meaning of this standard are retaining rings for holding structural components (e.g. rolling bearings) on shafts. They are given an eccentric shape, are fitted with spring retention in grooves and are suitable for the transmission of axial forces.
1980
English
Slotted head machine screws for precision instruments
This Japanese Industrial Standard specifies the steel slotted head machine screws, herein after referred to as the "steel machine screws", brass slotted head machine screws, hereinafter referred to as the " brass machine screws", and stainless steel slotted head machine screws, hereinafter referr...
2002
English
WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES
a. CARBON STEEL WASHERS SHALL HAVE A HARDNESS OF 38 TO 46HRC. b. CORROSION-RESISTANT STEEL WASHERS TYPE 420 (UNS S42000) SHALL HAVE A HARDNESS OF 45-53 HRC, AND TYPE 300 (UNS S3XXXX) SERIES WASHERS SHALL HAVE A HARDNESS OF 35-43-HRC. c. PHOSPHOR BRONZE AND TIN-BRASS WASHERS SHALL HAVE A MINIMUM H...