DIN 7604

Light-duty hexagon head screw plugs

English 1992
0.000
DIN
Detailed Information

This standard specifies dimensions and technical delivery conditions for screw plugs which are Intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 5 and 6. Such plugs may be used together with seal rings as specified in DIN 7603, type and material of which are to be selected as a function of the operating conditions (e.g. pressure, temperature, fluid with which the threaded parts are in contact. etc.)

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7049
1983
English

Cross recessed pan head tapping screws

This International Standard specifies the characteristics of cross recessed pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
DIN
DIN 979
1987
English

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

This standard specifies requirements for M6 to M52 hexagon slotted nuts and castle nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). If, in special c [...]
ASME
ASME B18.2.8
1999
English

CLEARANCE HOLES FOR BOLTS, SCREWS, AND STUDS

This standard covers the recommended clearance hole sizes for #0 through 1.5 inch fasteners in three classes of clearance using a close-, normal-, and loose-fit category.
ASTM
ASTM F2437
2006
English

CARBON AND ALLOY STEEL COMPRSSIBL-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH CAP SCREWS, BOLTS, ANCHORS, AND STUDS

1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, [...]
ISO
ISO 965-1
1980
English

ISO general purpose metric screw threads – Tolerances – Part 1 : Principles and basic data

This International Standard specifies a tolerance system for screw threads conforming to ISO 261, ISO general purpose metric screw threads - General plan. The tolerance system refers to the bas [...]
ASME
Abstract ASME B1.15
1995
English

UNIFIED INCH SCREW THREADS (UNJ THREAD FORM)

This standard establishes the basic triangular profile for the UNJ thread form, provides a system of designations, lists the standard series of diameter-pitch combinations for diameters from 0. [...]
ASTM
ASTM A240/A240M
2011
English

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. 1.2 The values [...]
ISO
ISO 887
1983
English

Plain washers for metric bolts, screws and nuts – General plan

This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. [...]
JIS
JIS B 0205-1
2001
English

ISO general purpose metric screw threads — Part 1: Basic profile

This Standard specifies the basic profile for ISO general purpose metric screw threads (M).