DIN 7337

Break mandrel blind rivets

English 1991
0.000
DIN
Detailed Information

This standard specifies dimensions of, and requirements regarding material, design, strength and finish, as well as the relevant methods of test for, blind rivets of the self -plugging type. Such rivets consist of a rivet body and an integral mandrel, which breaks off on setting (‘break mandrel’, for short). They are intended in particular for applications where the back side is not normally accessible after rivetting.

Use of blind rivets for automatic feed shall be the subject of agreement.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 962
1990
English

Designation system for fasteners

This standard specifies a system of designation for bolts, screws, studs and nuts (‘fasteners’, for short), and also gives supplementary order designations for special features and finishes […]
DIN
DIN 917
1987
English

Hexagon cap nuts

This standard specifies requirements for M 4 to M 72 coarse and fine pitch thread hexagon cap nuts assigned to product grade A.
DIN
DIN 6791
1993
English

Semitubular pan head rivets with nominal diameters from 1,6 to 10 mm

This standard specifies dimensions of steel and nonferrous metal semitubular pan head rivets with nominal diameters from 1,6 to 10 mm.
ISO
ISO 2901
1977
English

ISO metric trapezoidal screw threads – Basic profile and maximum material profiles

This International Standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads.
DIN
DIN 7995
1984
English

Cross recessed raised countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the […]
DIN EN
DIN EN 28676
1992
English

Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread d […]
DIN EN
DIN EN 10269 Berichtigung 2
2007
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
ASTM
ASTM F1941M
2005
English

Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

1.1 This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with metric screw threads. It specifies coating thick […]
DIN
DIN 7968
1989
English

Hexagon fit bolts for structural steel bolting for supply with or without nut

This standard specifies requirements for M 12 to M 30 hexagon fit bolts assigned to product grade C for use in structural steel bolting.