DIN 7970

Threads and thread ends for tapping screws (modified version of ISO 1478)

English 1984
0.000
DIN
Detailed Information

This standard specifies the thread and thread ends of tapping screws of thread sizes from ST 1,5 up to and including ST 9,5.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10269
1999
English

Steel and nickel alloys for fasteners with specified elevated and/or low temperature properties – English version of DIN EN 10269

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperature made of non-alloy and alloy (including stainless) steels and nickel alloys as given in table 1. The general technical deliver […]
DIN
DIN 984
1981
English

Spring retaining rings with lugs for use in bores (internal circlips)

For the purpose of this standard, internal circlips are spring retaining rings for fitting in bores (grooves). They have an eccentric form and have a number of lugs of equal depth uniformly distributed around the circumference. Circlips are suitable for retaining machine components which […]
ASTM
ASTM F1077
1995
English

Standard Guide for Selection of Committee F-16 Fastener Specifications

1.1 This guide is intended to provide a rapid, easy to use method for identifying Committee F-16 fastener specifications and their applicable marking requirements.
DIN
DIN 267-23
1983
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Festigkeitsklassen für Muttern mit Feingewinde (ISO-Klassen)

Im Jahre 1967 wurde die Norm DIN 267 Teil 4 auf internationale Festigkeitsklassen für Muttern umgestellt. Die alten Kennzeichen 4D, 5D, 5S, 6G, 6S und 8G wurden durch die Kennzahlen 4, 5, 6, 8, 10, 12 und 14 ersetzt, wobei die Kennzahl 1/100 der Mindestzugfestigkeit (N/mm2) der Schraube e […]
ASME
ASME B18.5
2008
English

ROUND HEAD BOLTS (INCH SERIES)

1.1.1 This Standard covers the complete general and dimensional data for the various types of inch series bolts generally classified as round head bolts and recognized as American National Standard. 1.1.2 The inclusion of dimensional data in this Standard is not intended to imply that al […]
ASTM
Abstract of ASTM F468
2001
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications. 1.2 Applicable nuts for use with bol […]