MIL-DTL-16232G
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
English
2000
0.000
Detailed Information
This specification covers two types of heavy phosphate coating for ferrous metals, applied by immersion. The coatings consist of a manganese phosphate or zinc phosphate base and, when specified, a supplementary treatment (see 6.1).
Download File
(Log in to download spec.)
Check out other specifications
1997
English
STAINLESS STEEL METRIC BOLTS, SCREWS, AND STUDS
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric bolts, screws, and studs with nominal thread diameters M1.6 through M36, and intended for use in engineering applications requiring general corrosion resistance. 1.2 Eight groups of stainless steel a...
1986
English
Tabular layouts of article characteristics for bolts, pins, rivets, and keys
This standard specifies tabular layouts, in accordance with DIN 4000 Part 1, for standardized and non-standardized bolts, pins, rivets, and keys.
1983
English
ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes
This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maximum dimension and by R min = 0,125P ≈ H/7 for the minimum dimension of the minor diameter d3, as specified in...
1986
English
Slotted round head wood screws
The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g has been replaced by product grade C. c) The content of the standar...
2002
English
STUDS AND BENT BOLTS
This standard covers the general and dimensional requirements for various types of studs and bent bolts in nominal thread diameters 1-1/2 inches and smaller. Section A details double end studs (Table 1); Section B details interference-thread double end studs (Table 2); Section C details continuo...
2010
English
HEX CAP SCREWS, BOLTS, AND STUDS, STEEL, HEAT TREATED, 120/105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE
1.1 This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 1-1/2 in.; and 90 ksi for diameters 1-3/4 in. to 3.0 in. inclusive. The term “fasteners"...