NASM 24671

SCREW, CAP, SOCKET HEAD, FLAT COUNTERSUNK, 82°, CORROSION-RESISTING STEEL, UNC-3A

English 1998

0.000

Detailed Information

MATERIAL: STEEL CORROSION-RESISTING, IN ACCORDANCE WITH FED. STD No 66; AISI 302. 303. 304, 305. 316 OR 384 (DEVELOPED FOR COLD HEADING). MINIMUM ULTIMATE TENSILE STRENGTH SHALL BE 80.000 PSI FOR SIZES THRU 0.625 AND 70.000 PSI FOR SIZES OVER 0.625.

Download File

(Log in to download spec.)

Check out other specifications

DIN EN

DIN EN 14399-4

2006

English

High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies – English version of DIN EN 14399-4:2006-06

This document specifies together with EN 14399-1 the requirements for assemblies of high-strength structural bolts and nuts of system HV suitable for preloaded joints with large widths across flats, thread sizes M 12 to M 36 and property classes 10.9/10. Bolt and nut assemblies to this document ...

IFI

IFI-155

2005

English

TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS-INCH SERIES

This standard establishes a test procedure for nonmetallic resistant element prevailing-torque nuts having coarse threads, to determine their conformance with specified prevailing-torque requirements in nominal sizes #10 thru 1 in. intended for application temperatures of - 49°F to 250°F. Both pa...

ASTM

ASTM A394

1993

English

Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts, in nominal thread diameters of 1/2, 5/8, 3/4, and 1 in. for use in the construction of transmission towers, substations. and similar...

DIN

DIN 78

2001

English

Bolt end protrusions

This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13-1 and DIN ISO 261, and hexagon nuts.

ASME ANSI

ASME/ANSI B18.3.3M

1993

English

METRIC HEXAGON SOCKET HEAD SHOULDER SCREWS

1.1.1 This standard contains complete dimensional, mechanical, and performance requirements for Metric Series Hexagon Socket Head Shoulder Screws with nominal shoulder diameters from 6.5 mm to 25 mm recognized as American National Standard. Also included are appendices covering formulas for dimen...

ISO

ISO 2010

2011

English

Slotted raised countersunk head screws — Product grade A

This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from ...