JIS B 0209-2

ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality

English 2001
0.000
JIS
Detailed Information

This Standard specifies limits of sizes for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to JIS B 0205-3 having basic profile according to JIS B 0205-1.

The limits of sizes for the tolerance quality specified are derived from the fundamental deviations and tolerances specified in JIS B 0209-1.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 963
1970
English

Slotted Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)

Intermediate length should as for as possible be avoided. Lengths over 100 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quoted [...]
ANSI
ANSI B18.2.3.5M
1995
English

METRIC HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not i [...]
ASME
ASME B18.3
2012
English

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

This Standard covers complete general and dimensional data for various types of hexagon socket cap screws, shoulder screws, set screws, and hexagon keys recognized as an American National Stand [...]
DIN
DIN 934
1987
English

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply [...]
SAE
SAE J121M
1996
English

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar [...]
ASTM
ASTM F879M
1991
English

Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread [...]
DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or fin [...]
DIN
DIN 267-12
1971
English

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons [...]
ASME
ASME B18.1.2
2006
English

LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER

This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufact [...]