BS EN 1665
Hexagon bolts with flange — Heavy series
English
1997
0.000
Detailed Information
This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
Download File
(Log in to download spec.)
Check out other specifications
2002
English
INSPECTION AND QUALITY ASSURANCE FOR HIGH-VOLUME MACHINE ASSEMBLY FASTENERS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. Included in this plan are fasteners such as th […]
1993
English
METRIC HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS
1.1.1 This standard contains complete general and dimensional requirements for metric series hexagon socket flat countersunk head cap screws of nominal sizes from 3 mm to 20 mm recognized as American National Standard. Also included are appendices covering formulas for dimensions, part nu […]
2009
English
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
This part of ISO 3506 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.
2001
English
Fasteners—Electroplated coatings
This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fasteners. Thi […]
1995
English
Studs with a length of engagement equal to about 2 d
This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in aluminium alloys. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk6 as in DIN 13-51, unless the stud is designated Fo ('without interference-fit thread') or Sn4.
2003
English
Self drilling tapping screws
This Japanese Industrial Standard specifies self drilling tapping screws of steel made (hereafter referred to as “steel drilling tapping screws”) and those of martensitic stainless steel made (hereafter referred to as “stainless steel drilling tapping screws”) for general use.