JIS B 1128

Hexalobular socket head tapping screws

English 2004
5.001
JIS
Detailed Information

This Standard specifies the characteristics of hexalobular socket head tapping screws with nominal thread size from ST2.9 to ST6.3. If specifications other than those listed in this Standard are required, they should be selected from existing JIS standards, for example, JIS B 1007, JIS B 1021 and JIS B 1055.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0212
1973
English

Limits of sizes and tolerances for unified fine screw threads

This Japanese Industrial Standard specifies limits of sizes and tolerances for unified fine screw threads specified in JIS B 0208-Unified Fine Screw Threads, mainly used for the purpose of fastening.
ASTM
ASTM A967
2005
English

Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

1.1 This specification covers several different types of chemical passivation treatments for stainless steel parts. It includes recommendations and precautions for descaling, cleaning, and pass [...]
ASTM
ASTM A563M
1997
English

Standard Specification for Carbon and Alloy Steel Nuts [Metric]

1.1 This specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bol [...]
ASTM
Abstract of ASTM A563M
1996
English

CARBON AND ALLOY STEEL METRIC NUTS

This specification covers chemical and mechanical requirements for eight property classes of hex and hex flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, [...]
Others
MPIF 35
2016
English

Materials Standards for Metal Injection Molded Parts

MPIF Standard 35 is issued to provide the design and materials engineer with the information necessary for specifying powder metal (PM) materials that have been developed by the PM parts manufa [...]
ANSI ASME
ANSI/ASME B18.6.3
1998
English

SQUARE AND HEX MACHINE SCREW NUTS

1. ANSI/ASME B18.6.3 is a standard developed through the procedures of The American Society of Mechanical Engineers. B18.6.3 is under the jurisdiction of ASME Standards Committee B18 and is the [...]
ISO
ISO 3269
1988
English

Fasteners – Acceptance inspection

1.1 This International Standard specifies the procedure to be followed by the purchaser at his acceptance inspection in order to decide whether a lot of fasteners may be accepted or rejected, w [...]
JIS
JIS B 1053
1999
English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5 : Set screws and similar threaded fasteners not under tensile stresses

This Standard specifies the mechanical properties of set screws and similar threaded fasteners not under tensile stresses with nominal thread diameters from 1.6 mm up to and including 24 mm, wh [...]
DIN
DIN 7346
1978
English

Spring-Type Straight Pins (Roll Pins) Light-weight Type

Spring-type straight pins (also known as roll pins) to this Standard are pins made of spring steel, rolled from strip and having a slot along their length and one or two chamfers to permit inse [...]