ASME B18.2.3.1M

METRIC HEX CAP SCREWS

English 1999
0.000
ASME
Detailed Information

1.1 This standard covers the complete general and dimensional data for metric series hex cap screws recognized as American National Standard.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options described herein are stock items. Consumers should consult with suppliers concerning lists of stock production hex cap screws.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 4755
1983
English

Fasteners – Thread undercuts for external metric ISO threads

This International Standard lays down the form and dimensions of thread undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where an und […]
DIN EN
DIN EN 28765
1992
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread d […]
JIS
JIS B 1122
1996
English

Cross recessed head tapping screws

This Japanese Industrial Standard specifies the steel cross recessed head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
DIN
DIN 1435
1977
German

Bolzen mit kleinem Kopf, Ausführung mg

Bolzen nach dieser Norm sind nur für Ersatzlieferungen bestimmt, Für Neukonstruktionen sind Bolzen nach DIN 1444 zu verwenden.
ASTM
Abstract of ASTM F593
2002
English

STAINLESS STEEL BOLTS, HEX CAP SCREWS, AND STUDS

1.1 This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in. nominal diameter inclusive in a number of alloys in common use and inten […]
JIS
JIS B 1001
1985
English

Diameter of clearance holes and counter bores for bolts and screws

This Japanese Industrial Standard specifies the diameters of clearance holes, hereinafter referred to as the "bolt hole diameters", and the diameters of counterbores for bolts, machine scre […]
DIN
DIN 6883
1956
English

Taper Key Torque Transmission – Parallel Keys – Dimensions and Application

No figures for permissible variations of tapers on keys and in hub keyways have so far been laid down. If, in special cases, certain prescribed permissible variations must be observed, thes […]
ANSI
ANSI B18.22M
1990
English

METRIC PLAIN WASHERS

This standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications. The inclus […]
ASME
ASME B18.31.3
2009
English

THREADED RODS (INCH SERIES)

This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, […]