IFI-115

FLANGE 12-POINT SCREWS

English 2007
0.000
IFI
Detailed Information

IFI-115 is a standard developed through the procedures of Industrial Fasteners Institute. IFI-115 was first published in 1970 and modestly revised and reissued in 1986 and 2002.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7380
1983
English

Hexagon socket button head screws – Metric series

This International Standard lays down the specification for hexagon socket button head screws with thread sizes from M 3 to M 16 inclusive.
JIS
JIS B 0101
1994
English

Screw threads and fasteners — Vocabulary

This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw th [...]
DIN
DIN 7983
1990
English

Cross recessed raised countersunk head tapping screws

DIN 7504 shall apply with regard to tapping screws with drilling tip (self-drilling screws). The DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for screws as covered in [...]
DIN
DIN 267-4
1983
English

Fasteners – Technical delivery conditions – Property classes for nuts (previous classes)

DIN 267 Part 4 was converted to the international property classes for nuts in 1967. The previous symbols 4D, 5D, 5S, 6G, 6S and 8G were replaced by code numbers 4, 5, 6, 8, 10, 12 and 14 where [...]
MIL
MIL-DTL-1222J
2000
English

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, [...]
ASTM
ASTM F606M
1995
English

STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS [METRIC]

1.1 These test methods establish procedures for conducting tests to determine the mechanical properties of metric externally and internally threaded fasteners, washers, and rivets. 1.2 Property [...]
ASME
ASME B18.5
1998
English

ROUND HEAD BOLTS (INCH SERIES)

This standard covers the complete general and dimensional data for the various types of inch series bolts generally classified as round head bolts and recognized as American National Standard. [...]
ISO
ISO 10664
2005
English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contou [...]
DIN EN
DIN EN 28733
1992
English

Unhardened parallel pins with internal thread (ISO 8733 : 1986) English version of DIN EN 28 733

This International Standard specifies the characteristics of unhardened parallel pins with internal thread, with metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.