ASTM B695
COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL
English
2009
0.000
Detailed Information
This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and including 107 μm. The seven thickest classes are usually referred to as “mechanically galvanized.”
Download File
(Log in to download spec.)
Check out other specifications
2000
German
Galvanische Überzüge – Zinküberzüge auf Eisenwerkstoffen – Begriffe, Korrosionsprüfung und Korrosionsbeständigkeit
Diese Norm gilt nur in Verbindung mit DIN EN 12329, die Anforderungen an galvanisch abgeschiedene Zinküberzüge mit zusätzlicher Behandlung festlegt. In Ergänzung zu DIN EN 12329 legt diese Norm für verschiedene Beanspruchungsstufen die Mindestkorrosionsbeständigkeiten nach DIN 50018 KFW 2,0 S, s...
1993
English
Standard Specification for Steel Structural Rivets
1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 1 1/2 in. ( 13 to 38 mm), inclusive, for structural fabricating purposes. The grades are as follows: 1.1.1 Grade 1 is a carbon steel rivet for general purposes. 1.1.2 Grade 2 is a carbon-manganese steel rivet suit...
1994
English
SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS
This SAE Recommended Practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and processing of bolts, screws, and studs which are primarily intended for use in automotive assemblies subject...
2002
English
STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS
1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread 0.060 through 0.625 in. intended for use in applications requiring general corrosion resistance. 1.2 The f...
1998
English
METRIC MACHINE SCREWS
This standard covers the complete general and dimensional data for metric flat countersunk, oval countersunk and pan slotted and recessed head machine screws and metric hex and hex flange head machine screws recognized as standard. Also included are Appendices which provide specifications and ins...
1973
English
Unified coarse screw threads
This Japanese Industrial Standard specifies the basic profile, and the formal and basic size of unified coarse screw threads used for aircrafts and otherwise only when especially required. Reference : This unified coarse screw threads are coincident with the coarse series screw threads of ISO in...