Abstract of ASTM F812/F812M

SURFACE DISCONTINUITIES OF NUTS

English 2007
0.000
ASTM
Detailed Information

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of inch-series nuts with nominal diameters 1/4 in. and larger.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1122
1996
English

Cross recessed head tapping screws

This Japanese Industrial Standard specifies the steel cross recessed head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
DIN
DIN 6916
1989
English

Round washers for high-strength structural steel bolting

The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.
JIS
JIS B 0218
1980
English

Limit of sizes and tolerances for metric trapezoidal screw threads

This Japanese Industrial Standard specifies limit of sizes and tolerances for metric trapezoidal screw threads specified in JIS B 0216. The limit of sizes and tolerances due to this standard do not apply to those with special requirements for axial displacement, for example, for lead screw.
DIN
DIN 7983
1990
English

Cross recessed raised countersunk head tapping screws

DIN 7504 shall apply with regard to tapping screws with drilling tip (self-drilling screws). The DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for screws as covered in this standard.
ASME
ASME B18.3
2008
English

SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)

1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys recognized as an American National Standard. Also, included are appendices that provide specifications for ...
ASME
ASME B18.13
1996
English

SCREW AND WASHER ASSEMBLIES – SEMS

(a) This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. The word SEMS is recognized in the United States as a generic term applicable to screw and washer assemblies. Also included in this standard are a...