IFI-520
METRIC PULL THROUGH MANDREL BLIND RIVETS
English
1999
0.000
Detailed Information
This standard establishes the dimensional, mechanical, and performance requirements of metric pull through mandrel blind
rivets suitable for use in engineering assemblies where load transmitting capability by the rivet is a design requirement.
Download File
(Log in to download spec.)
Check out other specifications
1972
English
Lifting Eye Bolts
The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new edition of the Standard solely prescribes C 15, which is somewhat more ductile than St 34. The technic […]
1999
English
CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS
1.1 This specification covers the basic performance requirements for an electrolytic or mechanical coating of cadmium or zinc followed by a chromate and baked organic coating for ferrous and nonferrous fasteners. 1.2 There are eight grades available under this standard; four for zinc and […]
1994
English
Eyenuts
This Japanese Industrial Standard specifies eyenuts for general lifting work of machinery (hereafter referred to as "nuts").
1990
English
Metal washers – Technical delivery conditions
This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It does not cover washers manufactured by machining (e.g. by drilling or turning). This standard specif […]
2009
English
Thread rolling screws for ISO metric thread – Part 1: Technical delivery conditions for case hardened and tempered screws
This standard specifies requirements for case hardened and tempered metric thread rolling screws with various forms of head geometry designed to produce internal threads with nominal diameters from 2 mm to 12 mm, which fit general purpose ISO metric screw threads and are used in general e […]
2011
English
Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
This International Standard specifies fundamental concepts, principles and rules valid for the creation, interpretation and application of all other International Standards, Technical Specifications and Technical Reports concerning dimensional and geometrical product specifications (GPS) […]