Check out other specifications
1992
English
Slotted cheese head screws – Product grade A
This International Standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications others than those listed in this International Standard are required, they should be selected from […]
2009
English
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — the term used when bolts, screws and studs are considered all together — that confor […]
2007
English
QUENCHED AND TEMPERED ALLOY STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS
This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in diameter for application at normal atmospheric temperatures, where high strength is required and for limited app […]
1998
German
Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997
Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.
1995
English
Slotted set screws
This Japanese Industrial Standard specifies the steel made slotted set screws (hereafter, referred to as "steel set screws"), and stainless steel made set screws (hereafter, referred to as "stainless steel set screws” ) for general use.
1992
English
Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B (ISO 8674 :1988) English version of DIN EN 28 674
This International Standard gives specifications for hexagon nuts, style 2, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 36 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.