Check out other specifications
1967
English
Hexagon Screws – Thread Approximately to Head – Metric Thread Type g
These screws are normally made in the sizes for which weight data are indicated. Sizes for which the weight data are emphasized by bold type are generally stocked commercially because they are in wide demand. As far as the other sizes are concerned, the customer may have to reckon with long deliv...
2001
English
ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data
This Standard specifies the tolerance system for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2. The tolerance system refers to the basic profile in accordance with JIS B 0205-1.
2009
English
Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered ...
1988
English
Hexagon head bolts with metric fine pitch thread – Product grades A and B
This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is shorter, ...
1995
English
FORGED EYE BOLTS
This standard is limited to dimensions and capacities for forged threaded eyebolts intended primarily for lifting applications, and covers the following types and styles. Type 1, Plain pattern (straight shank) (see Table 1) Style A, Long length Style B, Short length Type 2, Shoulder pattern (se...
1993
English
CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS
1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or dip·drain methods. 1.3 The coating process does not induce hydrogen embrittlement, providing that the fasten...