STD 121-0013

Electrolytic cathodic protective surface treatment with friction requirements, Y 1300

English 2017
0.000
Custom
Detailed Information

Surface treatment Y 1300 covers different surface treatment classes. The class of the treated component is determined by the relevant environmental and finish requirements.

This standard covers electrolytic cathodic protective surface treatment free from hexavalent chromium for corrosion protection of iron and steel parts with friction requirements.

For flake cathodic protective surface treatment of parts with friction requirements, see STD 121-0012, Y 1200.

For flake cathodic protective surface treatment of parts without friction requirements, see STD 121-0014, Y 1400

For electrolytic cathodic protective surface treatment of parts without friction requirements, see STD 121-0015, Y 1500

For cathodic protective surface treatment of tubes and tube fittings, see STD 121-0006, Y 400.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 478
1985
English

Square head bolts with collar

This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from those specified in the present standard, e. g. in respect of nominal length or property class, the specificat […]
NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
DIN
DIN 125-2
1990
English

Product grade A washers with a hardness from 300 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness of 300 HV or more. The preferred application of these washers is in product grades A and B hexagon head bolt/hexagon nut assemblies, with widths across flats as specified in ISO 272.
JIS
JIS B 1182
1995
English

Square head bolts

This Japanese Industrial Standard specifies the steel square head bolts for general use (hereafter, referred to as "bolts"). Further, the strength class column II (4T) of mechanical properties specified in this Standard will be abolished on April 1, 1999.
DIN EN
DIN EN 10025
1994
English

Hot rolled unalloyed structural steel products – Technical delivery conditions (includes Amendment A 1 : 1993) English version of DIN EN 10025

1.1 This European Standard specifies requirements for long products and flat products of hot rolled non-alloy, base and quality steels in the grades and qualities given in tables 2 and 3 (chemical composition) and 5 and 6 (mechanical properties) in the usual delivery condition as given in […]
ASTM
Abstract of ASTM F959M
1997
English

COMPRESSIBLE-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH STRUCTURAL FASTENERS [METRIC]

1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural bolt. 1.2 Two types of direct tension indicators in nominal diameter sizes M16 through M36 are c […]