ASME B18.21.2M

LOCK WASHERS [METRIC SERIES]

English 1994
0.000
ASME
Detailed Information

1.1 .1 This standard covers the dimensions, physical properties, and methods of testing for helical spring and tooth lock washers.

1.1.2 The inclusion of dimensional data in this standard is not intended to imply that all products described are stock production items. Consumers should consult with suppliers concerning the availability of products.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 78
2001
English

Bolt end protrusions

This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13-1 and DIN ISO 261, and hexagon nuts.
ISO
ISO 8677
1986
English

Cup head square neck bolts with large head – Product grade C

This International Standard specifies the characteristics of cup head square neck bolts with large head, with metric dimensions and thread sizes from M5 to M20 inclusive, of product grade C.
ISO
ISO 898-7
1992
English

Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordance with ISO 898-1. The test applies to bolts and screws with thread less than M3 for which no breaking...
DIN
DIN 82
1973
English

Knurls

Compared with the January 1940 issue of DIN 82, the standard denomination "knurl" has been adopted for all types, since the previous denomination "diamond knurling" and "negative diamond knurling" were not used consistently, and hence difficulties arose in the choice of tools. Some types of knurl...
ISO
ISO 1502
1978
English

ISO general purpose metric screw threads – Gauging

This International Standard gives the necessary instructions for the manufacture and use of gauges for checking ISO general purpose metric screw threads complying with ISO 68 and ISO 261. It is recognized that other methods of checking may be used, for example measurement with indicating instrum...
ASME
ASME Draft Revision B18.18.2
2002
English

INSPECTION AND QUALITY ASSURANCE FOR HIGH-VOLUME MACHINE ASSEMBLY FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. Included in this plan are fasteners such as those wher...