Abstract of ASTM F812/F812M
SURFACE DISCONTINUITIES OF NUTS
English
2007
0.000
Detailed Information
This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of inch-series nuts with nominal diameters 1/4 in. and larger.

Download File
(Log in to download spec.)
Check out other specifications
1986
English
Slotted pan head screws with large head
The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April1968 edition, has been replaced by product grade F as specified in DIN 267 Part 6 and ...
1995
English
METRIC HEX NUTS, STYLE 2
1.1 This standard covers the complete general and dimensional data for metric hex nuts, Style 2, recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described he...
1993
English
HIGH-STRENGTH STEEL BOLTS, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS [METRIC]
1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inclusive. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Joints Usi...
2001
English
NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS FOR SCREW THREADS
1. ANSI/ASME B1.7M is a standard developed through the procedures of The American Society of Mechanical Engineers. B1.7M is under the jurisdiction of ASME Standards Committee B1. 2. B1.7M establishes uniform practices for standard screw threads with regard to screw thread nomenclature and letter ...