ASME B18.16.3M
DIMENSIONAL REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS
English
1998
0.000
Detailed Information
This standard covers the complete general and dimensional data for metric prevailing torque hex nuts, Table 1, and hex flange nuts, Table 2.
Download File
(Log in to download spec.)
Check out other specifications
1997
English
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal diameters 5 mm and larger and inch-series nuts with nominal diameters 1/4 in. and larger. 1.2 The values sta...
1992
English
Dimensions and quality of conical disc springs
This standard specifies requirements for the materials, dimensions, tolerances, and permissible stresses for conical disc springs. It includes graphs showing the permissible relaxation and the endurance life of such springs, as a function of stress. The minimum requirements specified here are in...
1999
English
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5 : Set screws and similar threaded fasteners not under tensile stresses
This Standard specifies the mechanical properties of set screws and similar threaded fasteners not under tensile stresses with nominal thread diameters from 1.6 mm up to and including 24 mm, which are made of carbon steel or alloy steel (hereafter referred to as “set screws”). The mechanical and...
2008
English
STAINLESS STEEL SOCKET-SET SCREWS
1.1 This specification covers the requirements for austenitic grade stainless steel socket-set screws (SSS) sizes 0.060 through 0.500 in., in two conditions, AF and CW. 1.2 Units一The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in ...
1983
German
Mechanische Verbindungselemente – Technische Lieferbedingungen – Festigkeitsklassen für Muttern mit Feingewinde (ISO-Klassen)
Im Jahre 1967 wurde die Norm DIN 267 Teil 4 auf internationale Festigkeitsklassen für Muttern umgestellt. Die alten Kennzeichen 4D, 5D, 5S, 6G, 6S und 8G wurden durch die Kennzahlen 4, 5, 6, 8, 10, 12 und 14 ersetzt, wobei die Kennzahl 1/100 der Mindestzugfestigkeit (N/mm2) der Schraube entsprach...