ASTM A574M
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
English
1998
0.000
Detailed Information
1.1 This specification covers the requirements for quenched and tempered alloy steel socket-head cap screws 1.6 mm
through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
Download File
(Log in to download spec.)
Check out other specifications
1983
English
Plain washers – Large series – Product grades A and C
This International Standard lays down the specification for plain washers of product grades A and C with outside diameter three times nominal size (nominal thread diameter), preferable for hexagon bolts, screws and nuts with width across flats according to ISO 272, with thread sizes from M 3 to M...
2006
English
High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06
This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive.
1969
English
Slotted Cheese Head Screws for Fine Mechanics M 0.3 to M 1.4
In the field of fine mechanics space conditions are often difficult, so that the correlation of a single head size to a given thread diameter fails to meet the requirements arising in applications involving small screws. To provide the widest possible range of variation whilst keeping the number ...
1990
English
Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer
This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated lock washer. Serrated lock washers are mainly designed to provide electric contact between components coate...
1993
English
INSPECTION AND QUALITY ASSURANCE FOR HIGH-VOLUME MACHINE ASSEMBLY FASTENERS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. Included in this plan are fasteners such as those wher...
1981
English
Parallel pins
Parallel pins in accordance with this 5tandard are designed for the fastening of two or more individual elements. A friction type connection can be achieved by the selection of suitable fits If such a connection is meant to be disconnected repeatedly, then it becomes preferable to use taper pins ...