ASME Archives - Fasten.one

2011

English

QUALITY ASSURANCE FOR FASTENERS

This quality focused Standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers. This Standard identi [...]

ASME

ASME B18.2.9

2010

English

STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS

1 SCOPE This Standard describes a gage and procedure for checking bolt or screw straightness at maximum material condition (MMC) and provides default limits when not stated in the applicable pr [...]

ASME

ASME B18.8.2

2005

English

TAPER PINS, DOWEL PINS, STRAIGHT PINS, GROOVED PINS AND SPRING PINS (INCH SERIES)

This standard is intended to cover the complete dimensional and general data for taper pins, recognized as “American National Standard," which are widely used in general industrial applications [...]

ASME

ASME B18.8.1

2005

English

CLEVIS PINS AND COTTER PINS (INCH SERIES)

This standard covers the complete dimensional and general data for clevis pins recognized as "American National Standard."

ASME

ASME B18.7

2007

English

GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS

This Standard covers complete general and dimensional data for semi-tubular rivets, full tubular rivets, split rivets, and rivet caps for use in general purpose applications. The products descr [...]

ASME

ASME B18.1.2

2006

English

LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER

This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufact [...]

ASME

ASME B18.1.1

2006

English

SMALL SOLID RIVETS 7/16 IN. NOMINAL DIAMETER AND SMALLER

This standard covers complete general and dimensional data for those types of small solid rivets recognized as “American National Standard." All other types of small solid rivets, within the li [...]

ASME

ASME B18.21.1

2009

English

WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)

This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 1-3/4 in.), [...]

ASME

ASME B18.13

2008

English

SCREW AND WASHER ASSEMBLIES – SEMS

(a) This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. The word SEMS is recognized in the United S [...]

ASME

ASME B18.6.8

2010

English

THUMB SCREWS AND WING SCREWS (INCH SERIES)

This Standard covers the general and dimensional data for the various types of thumb screws and wing screws recognized as standard.

ASME

ASME B18.6.3

2010

English

MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)

This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws, tapping screws, and metallic drive screws recogni [...]

ASME

ASME B18.6.2

2005

English

SLOTTED HEAD CAP SCREWS, SQUARE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)

This Standard covers the complete general and dimensional data for the various styles of slotted head cap screws and square head and slotted headless set screws recognized as “American National [...]

ASME

ASME B18.6.1

2008

English

WOOD SCREWS (INCH SERIES)

This standard covers the complete general and dimensional data for the various types of slotted and recessed head wood screws recognized as “American National Standard." Also included are appen [...]

ASME

ASME B18.16.6

2008

English

NYLON INSERT LOCKNUTS (INCH SERIES)

This Standard covers the complete general, dimensional, mechanical, and performance data for carbon steel, inch series nylon insert locknuts of property grades NE2, NE5, and NE8 designated as A [...]

ASME

ASME B18.16.4

2008

English

SERRATED HEX FLANGE LOCKNUTS 90,000 psi (INCH SERIES)

This Standard covers the general, dimensional, and mechanical performance requirements for low strength carbon steel, case hardened, regular and large serrated flange locknuts (inch series), re [...]

ASME

ASME B18.6.9

2010

English

WING NUTS (INCH SERIES)

This Standard covers complete general and dimensional data for nine various types and styles of wing nuts. Thumb screws and wing screws, recognized as American National Standard, are included i [...]

ASME

ASME B18.2.2

2010

English

NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)

This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, recognized [...]

ASME

ASME B18.2.6

2011

English

FASTENERS FOR USE IN STRUCTURAL APPLICATIONS

1.1.1 This Standard covers the complete general and dimensional data for five products in the inch series recognized as an American National Standard. These five structural products include: a. [...]

ASME

ASME B18.3

2008

English

SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)

1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys rec [...]

ASME

ASME B18.31.3

2009

English

THREADED RODS (INCH SERIES)

This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, and [...]