Library - Fasten.one

1979

English

Tolerances for fasteners – Part II: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics

This International Standard specifies the selection of tolerances for use in the preparation of ISO product standards for bolts, screws and nuts with thread diameters from 1 up to and including 3 mm and product grade F. It is recommended that these tolerances should also be used for non- […]

ISO

ISO 4759-1

2000

English

Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C

This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A. NOTE The product grades refer to the size of the tolerances where grade A is the most precise […]

ISO

ISO/R 2101

1971

English

ALUMINIUM AND ALUMINIUM ALLOYS – SHEAR TEST FOR RIVET WIRE AND RIVETS

This ISO Recommendation applies to the shear testing of aluminium and aluminium alloy rivet wire and rivets, having a diameter not greater than 10 mm (3/8 in).

ISO

ISO/R 1501

1970

English

ISO MINIATURE SCREW THREADS

This ISO Recommendation specifies ISO miniature screw threads with thread sizes from 0.3 to 1.4 mm diameter. For technological and functional reasons the tolerancing system for these threads differs from the tolerancing system for ISO general purpose metric screw threads.

ISO

ISO/R 1051

1969

English

RIVET SHANK DIAMETERS (DIAMETER RANGE 1 TO 36 mm)

This ISO Recommendation tabulates diameters for the shanks of metal rivets for general use.

ISO

ISO 15071

1999

English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8, 9.8, 10.9 and A2-70.

ISO

ISO 14585

2001

English

Hexalobular socket pan head tapping screws

This International Standard specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.

ISO

ISO 14584

2001

English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.

ISO

ISO 14583

2001

English

Hexalobular socket pan head screws

This International Standard specifies the characteristics of hexalobular socket pan head screws in product grades A and with thread sizes from M2 up to and including M10.

ISO

ISO 14580

2001

English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.

ISO

ISO 14579

2001

English

Hexalobular socket head cap screws

This International Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A.

ISO

ISO 13918

2008

English

Welding — Studs and ceramic ferrules for arc stud welding

This International Standard specifies: ⎯ requirements for studs and ceramic ferrules for arc stud welding; ⎯ dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity.

ISO

ISO 12683

2004

English

Mechanically deposited coatings of zinc — Specification and test methods

This document specifies the requirements for coatings of zinc that have been mechanically deposited on to fabricated metal articles to protect them from corrosion. It also describes the related test methods.

ISO

ISO 10683

2014

English

Fasteners — Non-electrolytically applied zinc flake coatings

This International Standard specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings: — with or without hexavalent chromium; — with or without top coat; — with or without lubricant (integral lubricant and/or subsequently added […]

ISO

ISO 10664

2005

English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contour of the hexalobular internal driving feature is defined by the gauges specified in Tables 3, 4 […]

ISO

ISO 8992

1986

English

Fasteners — General requirements for bolts, screws, studs and nuts

This International Standard specifies the general requirements for standardized bolts, screws, studs and nuts; it complements the International Standards on dimensional and tolerance requirements, and the International Standards on mechanical and functional requirements. It is recommende […]

ISO

ISO 8765

1988

English

Hexagon head bolts with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is s […]

ISO

ISO 8734

1997

English

Parallel pins of hardened steel and martensitic stainless steel (Dowel pins)

This International Standard specifies the characteristics of parallel pins (dowel pins) of steel, through hardened or case hardened and martensitic stainless steel with nominal diameters, d, from 1 mm to 20 mm inclusive.

ISO

ISO 8677

1986

English

Cup head square neck bolts with large head – Product grade C

This International Standard specifies the characteristics of cup head square neck bolts with large head, with metric dimensions and thread sizes from M5 to M20 inclusive, of product grade C.

ISO

ISO 8676

1988

English

Hexagon head screws with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is sh […]