Check out other specifications
2011
English
Button head screws — Part 2: Hexagon socket button head screws with collar
This International Standard specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this In...
1988
English
Fasteners – Technical delivery conditions – Hot-dip galvanized parts
Th s standard specifies the technical delivery conditions for fasteners (mainly screws. bolts and nuts) with an M 6 to M 36 coarse thread and provided with a zinc coating applied by hot-dip galvanizing, assigned to property classes up 10 10.9 for bolts and 10 for nuts. The minimum coating thickn...
1995
English
METRIC HEAVY HEX SCREWS
1.1 This standard covers the complete general and dimensional data for metric heavy hex screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options described herein a...
1984
English
Thread rolling screws for ISO metric thread – Guideline values for hole diameters
This standard specifies hole diameters for thread rolling screws conforming to DIN 7500 Part 1. These hole diameters are the result of tests carried out by manufacturers and users. The values given are assigned to various materials and lengths of engagement and should be regarded as guideline val...
1999
English
SQUARE AND HEX NUTS (INCH SERIES)
1.1.1 This standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts recognized as "American National Standard." Also included are appendixes covering gaging of slots in slotted nuts (Appendix I, page 0-20), wrench openings fo...
2004
English
Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled delivery condition in the grades and qualities given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 ...