This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel closed end blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation IFI-509.

This standard specifies dimensions and materials for ring seals and flat or filled gaskets designed for use with compression couplings (e.g. as specified in DIN 3850 or DIN 7601) or pipe plugs (as specified in DIN 908).

This International Standard lays down the dimensions and position of split pin holes and wire holes for bolts, screws and studs, recommended for use unless otherwise specified in the appropriate product standard.

CORROSION RESISTANT STEEL, TYPES 302 (UNS S30200), 303 (UNS S30300), 304 (UNS S30400), 302HQ (UNS S30430), 305 (UNS S30500), AND 316 (UNS S31600), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.

This Standard specifies the characteristics of hexagon nuts with flange. If, in special cases, specifications other than those listed in this Standard are required, they should be selected from existing standards, for example JIS B 0205-2, JIS B 0209-2, JIS B 1052 and JIS B 1054-2. NOTES 1 Hex...

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. Included in this plan are fasteners such as those wher...