DIN 966

Cross Recessed Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

English 1971

0.000

Detailed Information

Normally these screws are made in the sizes for which weight details are given.

If the screws are to be supplied with captive washer components, the designation must be augmented according to DIN 6900.

Recesses and recess penetration gauges according to DIN 7962.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 50979

2008

English

Metallic coatings – Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment

This standard applies for electrodeposited and Cr(VI)-free passivated zinc coatings and zinc alloy coatings on iron materials. The zinc alloy coatings contain nickel or iron (zinc/nickel, zinc/iron) as alloy components. The main purpose in the application of the coatings or coating systems is to...

JIS

JIS B 1181

2004

English

Hexagon nuts and hexagon thin nuts

This Japanese Industrial Standard has been prepared based on the third edition of ISO 4032 : 1999 Hexagon nuts, style 1-Product grades A and B published in 1999, the second edition of ISO 4033 Hexagon nuts, style 2-Product grades A and B published in 1999, the third edition of ISO 4034 Hexagon nu...

DIN EN

DIN EN 1666

1998

English

Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125: 1997, modified) English version of DIN EN 1666

This European Standard specifies the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d ≤ 16 mm and product grade B for d > ...

ANSI

ANSI B18.2.4.2M

1995

English

METRIC HEX NUTS, STYLE 2

1.1 This standard covers the complete general and dimensional data for metric hex nuts, Style 2, recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described he...

DIN

DIN 127

1970

English

Spring Lock Washers Barbed or Plain with Rectangular Cross-section

The surface of the spring lock washers must be smooth and free from scale and burr. The spring lock washers must be coiled without kinks and their outer edges must be sharp or at the most lightly rounded. The spring lock washers are to be supplied lightly greased. Subject to agreement, they may ...

DIN

DIN 7346

1978

English

Spring-Type Straight Pins (Roll Pins) Light-weight Type

Spring-type straight pins (also known as roll pins) to this Standard are pins made of spring steel, rolled from strip and having a slot along their length and one or two chamfers to permit insertion. They are mainly used for connecting two or more parts of an assembly and are suitable for withsta...