DIN 979
Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B
English
2000
0.000
Detailed Information
This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).
Download File
(Log in to download spec.)
Check out other specifications
1992
English
Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740
This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion, with metric dimensions and nominal diameter, d1, from 1,5 to ...
1998
English
Technical drawings—Screw threads and threaded parts—Part 3 : Simplified representation
This part of JIS B 0002 establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in JIS B 0002-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see JIS B 0002...
1992
English
Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordance with ISO 898-1. The test applies to bolts and screws with thread less than M3 for which no breaking...
1973
English
Knurls
Compared with the January 1940 issue of DIN 82, the standard denomination "knurl" has been adopted for all types, since the previous denomination "diamond knurling" and "negative diamond knurling" were not used consistently, and hence difficulties arose in the choice of tools. Some types of knurl...
1999
English
METRIC 12-SPLlNE FLANGE SCREWS
1.1 This standard covers the complete general and dimensional data for metric 12-spline flange screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options described h...
1986
English
Hexagon socket countersunk head cap screws
This standard specifies product grade A hexagon socket countersunk head cap screws with ISO metric screw thread from size M 3 up to and including size M 24. If, in special cases, the screws are to meet requirements other than those given in this standard, e.g. with regard to property class or ma...