The following amendments have been made in comparison with the November 1970 edition. a) The content of the standard has been editorially revised and aligned with the basic standards concerned. b) The technical delivery conditions have been amended. c) The previous design m as specified In DIN 26...

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical conditions of delivery and material according to DIN 267 Sheet 12.

1.1.1 This standard covers two types of general purpose plain washers designated as Type A and Type B. 1.1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the products described herein are production items. Consumers are requested to consult with manufact...

This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are specified in DIN 649), where T·head bolts with square neck are considered adequate detachable fasteners.

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts with thread sizes from M 5 to M 36 inclusive, in property classes 5, 8 and 10, and product grades A (d ≤ M 16) and B (d > M 16).

This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from ...