ISO 13918

Welding — Studs and ceramic ferrules for arc stud welding

English 2008
0.000
ISO
Detailed Information

This International Standard specifies:
⎯ requirements for studs and ceramic ferrules for arc stud welding;
⎯ dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7046-1
2011
English

Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8

This part of ISO 7046 specifies the characteristics of countersunk flat head screws with threads from M1,6 to M10 inclusive, of product grade A and property class 4.8, and with type H or type Z cross recess. If, in special cases, specifications other than those listed in this part of ISO 7046 ar...
ASTM
ASTM A194/A194M
2010
English

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1⁄4 through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range 1⁄4 in. and M6 nominal and above. These nuts are intended for hig...
MIL
MIL-DTL-13924D
1999
English

COATING, OXIDE, BLACK, FOR FERROUS METALS

This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary preservative treatment (see 3.11), may be used where a black surface is required. Only very limited cor...
JIS
JIS B 0271
2004
English

Three wires for screw thread measuring and four wires for screw thread measuring

This Japanese Industrial Standard specifies three wires and four wire for screw thread measuring (hereafter referred to as “wires”) which consist of a set of three and four wires respectively, intending to be used for measuring the pitch diameter of thread plug gauges defined in JIS B 0251, JIS B...
ASTM
ASTM A653/A653M
2000
English

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. 1.2 The product is produced in various zinc or zinc-iron alloy-coating weights [masses] or coating designations as shown in Table 1. 1.3 Pr...
ASME
ASME B18.2.3.9M
1999
English

METRIC HEAVY HEX FLANGE SCREWS

This standard covers the complete dimensional and general data for metric series heavy hex flange screws recognized as American National Standard.