ISO 4753
Fasteners – Ends of parts with external metric ISO thread
English
1983
0.000
Detailed Information
This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise specified in the appropriate product standard.
Download File
(Log in to download spec.)
Check out other specifications
1995
English
Cross recessed head screws with captive washer
This Japanese Industrial Standard specifies steel or brass made cross recessed head screws with captive washer for general purposes. The cross recessed head screw with captive washer is a screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent t...
1994
English
Hot rolled unalloyed structural steel products – Technical delivery conditions (includes Amendment A 1 : 1993) English version of DIN EN 10025
1.1 This European Standard specifies requirements for long products and flat products of hot rolled non-alloy, base and quality steels in the grades and qualities given in tables 2 and 3 (chemical composition) and 5 and 6 (mechanical properties) in the usual delivery condition as given in 7.2. T...
1970
English
Steel Conduit Thread – Thread Gauges
The "Go" thread ring gauge must be capable of being screwed by band, without the application or undue force, over the full length of the workpiece thread. The "Not go" thread ring gauge must be incapable or passing over the thread. The "Go" thread plug gauge must be capable of being screwed by h...
1970
English
Tapping Screws – Application and Core Hole Diameters
Set out below are some guidelines for the application of tapping screws. The fastening methods shown are to be deemed as examples. Tapping screws of Type B with cone end (also known as seekers) are the type predominantly used. This applies particularly when several sheets have to be fastened and...