Check out other specifications
1994
English
Countersunk slotted raised head screws (common head style) Product grade A
This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected fr...
1998
English
Technical drawings — Screw threads and threaded parts — Part 2 : Screw thread inserts
This part of JIS B 0002 specifies methods for the representation of screw thread inserts on technical drawings.
1984
English
Fasteners – Technical delivery conditions – Design and dimensional accuracy
This standard supplements DIN ISO 4759 Part 1 and applies to those product standards (dimensional standards) in which DIN 267 Part 2 is referred to, e.g. with regard to the surface roughness of bolts, screws and nuts.
1998
English
DIMENSIONAL REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS
This standard covers the complete general and dimensional data for metric prevailing torque hex nuts, Table 1, and hex flange nuts, Table 2.
1994
English
Countersunk head screws— Head configuration and gauging
This Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the respective product standards.
