ISO 7094
Plain washers – Extra large series – Product grade C
English
1983
0.000
Detailed Information
This International Standard lays down the specification for plain washers of product grade C with large outside diameter, preferable for bolts, screws and nuts in wood constructions, with thread sizes from M 5 to M 36 inclusive.
Download File
(Log in to download spec.)
Check out other specifications
2000
English
HEX COUPLING NUTS
1. All dimensions are in inches. 2. Top Surfaces of Nuts. Nuts shall be double chamfered. The diameter of chamfer circle shall be equal to the maximum width across flats within a tolerance of minus 15 percent. The length of chamfer at hex corners shall be from 5 to 15 percent of the basic thread ...
2009
English
Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems
This SAE Recommended Practice defines the minimum functional requirements for quick connect couplings used for supply, return, and vapor/emission fuel system connections. This document also defines standard male tube end form dimensions, so as to guarantee interchangeability between all connector...
1973
English
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
This International Standard specifies ISO general purpose metric screw threads for screws, bolts and nuts in the diameter range 1 to 39 mm. These selected sizes are recommended also for general engineering use. These screw threads are selected from ISO 261, ISO general purpose metric screw thre...
1984
German
Mechanische Verbindungselemente – Technische Lieferbedingungen – Ausführung und Maßgenauigkeit – Beispiele für Toleranzangaben
In den nachfolgenden Bildtafeln sind - nach den Produktklassen A, B und C (bisher Ausführungen m, mg und g) geordnet - die aus DIN ISO 4759 Teil 1 und den bisherigen Festlegungen in DIN 267 Teil 2, Ausgabe April 1968, entnommenen Maßtoleranzen den verschiedenen DIN-Normen über Schrauben und Mutte...
2008
English
WOOD SCREWS (INCH SERIES)
This standard covers the complete general and dimensional data for the various types of slotted and recessed head wood screws recognized as “American National Standard." Also included are appendixes which provide specifications and instructions for penetration gaging and wobble gaging of recessed...
1970
English
Conical Shaft Ends – with External Thread – Dimensions
For connection with ISO Recommendation ISO/R 775-1969, see Explanations. Conical shaft ends are intended to take belt pulleys, couplings and gears. Sizes and details such as chamfer, centre bore and surface quality, which are not specified, are to be designed as appropriate.
5.01