ISO 7721-2
Countersunk flat head screws – Part 2: Penetration depth of cross recesses
English
1990
0.000
Detailed Information
This part of ISO 7721 specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
Download File
(Log in to download spec.)
Check out other specifications
2008
English
SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)
1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys recognized as an American National Standard. Also, included are appendices that provide specifications for ...
1992
English
Hexagon head bolts – Product grades A and B (ISO 4014 : 1988) English version of DIN EN 24014
This International Standard gives specifications for hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is shorter and product grade B for threads over M24 or nominal lengt...
2003
English
Bolts of turnbuckle for building
This Japanese Industrial Standard specifies the bolts of turnbuckle used for building made of carbon steel products, hot-dip zinc coated carbon steel products and stainless steel products (hereafter referred to as “ bolts” ). For the bolts of turnbuckle for building of carbon steel products (exc...
1956
English
Taper Key Torque Transmission – Parallel Keys – Dimensions and Application
No figures for permissible variations of tapers on keys and in hub keyways have so far been laid down. If, in special cases, certain prescribed permissible variations must be observed, these must be agreed with the manufacturer when ordering.
2002
English
STAINLESS STEEL NUTS
1.1 This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.