Check out other specifications
1963
English
Telecommunications Engineering – Contact Rivets – Soldered or Welded – Technical Conditions of Delivery
These conditions of delivery apply to contact rivets according to DIN 46240 Sheet 2 with soldered-on or welded-on tip (at manufacturer's option) in contact materials which are not capable of being shaped by nonoutting methods, e.g. tungsten. Subject to agreement between manufacturer and user they...
2005
English
TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS-INCH SERIES
This standard establishes a test procedure for nonmetallic resistant element prevailing-torque nuts having coarse threads, to determine their conformance with specified prevailing-torque requirements in nominal sizes #10 thru 1 in. intended for application temperatures of - 49°F to 250°F. Both pa...
2012
English
Steel wire for mechanical springs – Part 1: Patented cold drawn unalloyed spring steel wire
1.1 This European Standard applies to patented cold drawn unalloyed steel wire of circular cross-section for the manufacture of mechanical springs for static duty and dynamic duty applications. 1.2 In addition to this European Standard, the general technical delivery requirements of EN 10021 are...
2010
English
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit deviations EI...