JIS B 1182

Square head bolts

English 1995

0.000

Detailed Information

This Japanese Industrial Standard specifies the steel square head bolts for general use (hereafter, referred to as “bolts”).

Further, the strength class column II (4T) of mechanical properties specified in this Standard will be abolished on April 1, 1999.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 7965

1965

English

Screwed Inserts (Screw Plugs)

These screwed inserts are intended primarily for screwing into wood or wood-like materials.

ISO

ISO 1479

1983

English

Hexagon head tapping screws

This International Standard specifies the characteristics of hexagon head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

JIS

JIS B 0203

1999

English

Taper pipe threads

This Standard specifies taper pipe threads and is applicable to the threads used mainly for pressure-tight joints on the threads for jointing the pipes, pipe fittings, fluid machinery, etc. The taper pipe thread of PT 3-1/ 2 and PT 7 to PT 12 in thread designation and the parallel pipe thread of...

ASTM

ASTM A240/A240M

2011

English

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stat...

DIN

DIN 960

1970

German

Sechskantschrauben – Metrisches Feingewinde – Ausführung m und mg

Eingeklammerte Größen sind möglichst zu vermeiden. Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen noch DIN 267

JIS

JIS B 1054-2

2001

English

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

This part of JIS B 1054 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic grades of corrosion- resistant stainless steels when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperatures.