Abstract of ASTM A193/A193M

ALLOY STEEL AND STAINLESS STEEL BOLTING FOR HIGH TEMPERATURE OR HIGH PRESSURE SERVICE AND OTHER SPECIAL PURPOSE APPLICATIONS

English 2010
0.000
ASTM
Detailed Information

This specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. See Specification A962/A962M for the definition of bolting. Bars and wire shall be hot-wrought and may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be carbide solution treated or carbide solution treated and strain-hardened. When strain hardened austenitic steel is ordered, the purchaser should take special care to ensure that Appendix X1 is thoroughly understood.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 1667
1998
English

Prevailing torque type all-metal hexagon nuts with flange, with metric fine pitch thread (ISO 12126: 1997, modified) English version of DIN EN 1667

This European Standard specifies the characteristics of prevailing torque type all metal hexagon nuts with flange and metric fine pitch thread with nominal thread diameters d from 8 mm up t […]
DIN
DIN 479
1985
English

Square head bolts with short dog point

This standard specifies product grade A square head bolts with short dog point and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from […]
JIS
JIS B 1107
2004
English

Hexalobular socket head screws

This Standard specifies the characteristics of hexalobular socket head screws in product grades A and with nominal thread sizes from M2 up to and including M10. If other specifications tha […]
DIN
DIN 988
1990
English

Shim rings and supporting rings

Shim rings are designed to prevent machine components from moving axially. The preferred application of these rings is to compensate for the play of such components where secured by circlip […]
ISO
ISO 898-2
2012
English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread

This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature […]
ASME
ASME B18.16.6
2008
English

NYLON INSERT LOCKNUTS (INCH SERIES)

This Standard covers the complete general, dimensional, mechanical, and performance data for carbon steel, inch series nylon insert locknuts of property grades NE2, NE5, and NE8 designated […]
SAE
SAE AS8879
2001
English

Screw Threads – UNJ Profile, Inch

This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root […]
ASME
ASME Draft B18.2.4.1M
1999
English

METRIC HEX NUTS, STYLE 1

This standard covers the complete general and dimensional data for metric hex nuts, Style 1, recognized as American National Standard.
DIN
DIN 6900-4
1990
English

Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer

This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated […]