Abstract of ASTM A449

QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

English 2000
0.000
ASTM
Detailed Information

This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 551
1972
English

Slotted Set Screws with Chamfered Ends

Compared with the April 1956 issue, the following amendments and additions should be noted: a) In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M [...]
ASME
ASME B18.8.1
2005
English

CLEVIS PINS AND COTTER PINS (INCH SERIES)

This standard covers the complete dimensional and general data for clevis pins recognized as "American National Standard."
ASTM
ASTM F468M
1997
English

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws. and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
DIN EN
DIN EN 24035
1992
English

Hexagon thin nuts (chamfered) Product grades A and B (ISO 4035 : 1986) English version of DIN EN 24 035

This International Standard gives specifications for chamfered hexagon thin nuts, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade B fo [...]
SAE
SAE J121M
1996
English

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar [...]
DIN EN
DIN EN 28741
1992
English

Half-length reverse taper grooved pins (ISO 8741 : 1986) English version of DIN EN 28 741

This International Standard specifies the characteristics of half-length reverse taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, w [...]
DIN
DIN 6906
1972
English

Lock Washers for Screw Assemblies

Toothed lock washers according to this Standard are intended only for screw assemblies according to DIN 6900.
ASME ANSI
ASME/ANSI B18.18.3M
1993
English

INSPECTION AND QUALITY ASSURANCE FOR SPECIAL PURPOSE FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection freq [...]
ASME
ASME Draft B18.2.4.1M
1999
English

METRIC HEX NUTS, STYLE 1

This standard covers the complete general and dimensional data for metric hex nuts, Style 1, recognized as American National Standard.