Abstract of ASTM A574M

ALLOY STEEL SOCKET HEAD CAP SCREWS [METRIC)

English 1997
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for quenched and tempered alloy steel socket head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-543
1999
English

TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP ON BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS

This standard provides a test method for determining the torque-tension relationship on both external and internal threaded fasteners for the purpose of measuring the frictional characteristics of the threaded fasteners. The results obtained by this test are relevant to the test condition […]
DIN
DIN 7964
1990
English

Reduced shank bolts and screws with coarse thread

This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Although such bolts have a reduced shank, they are not waisted shank bolts. In addi […]
ISO
ISO 7092
2000
English

Plain washers – Small series – Product grade A

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 36 mm inclusive.
DIN
DIN 968
1994
English

Cross recessed pan head tapping screws with collar

This standard specifies requirements for ST 2,9 to ST 6,3 cross recessed pan head tapping screws with collar. See DIN 962 (or the standards referred to therein) for special screw types or finishes.
SAE
Abstract of SAE J429
1999
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

This SAE standard covers the mechanical and material requirements for inch-series steel bolts, screws, studs, SEMS, and U-bolts used in automotive and related industries in sizes to 1-1/2 in. inclusive. The term "stud" as referred to herein applies to a cylindrical rod of moderate length […]
DIN EN
DIN EN 22339
1992
English

Unhardened taper pins (ISO 2339 : 1986) English version of DIN EN 22 339

This International Standard specifies the characteristics of unhardened taper pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.