Abstract of ASTM F1135

CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

English 1999
0.000
ASTM
Detailed Information

1.1 This specification covers the basic performance requirements for an electrolytic or mechanical coating of cadmium or zinc followed by a chromate and baked organic coating for ferrous and nonferrous fasteners.
1.2 There are eight grades available under this standard; four for zinc and four for cadmium.
1.3 This standard is intended primarily for fasteners such as nuts, bolts, and screws that require corrosion protection.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 14580
2001
English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.
NASM
NASM 16996
1998
English

SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNF-3A

CORROSION RESISTANT STEEL, TYPES 302 (UNS S30200), 303 (UNS S30300), 304 (UNS S30400), 302HQ (UNS S30430), 305 (UNS S30500), AND 316 (UNS S31600), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.
JIS
JIS B 1045
2001
English

Fasteners—Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

This Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric bolts, scre […]
DIN
DIN 918 Supplement 3
2001
English

Overview of European Standards for fasteners

This Supplement reflects the most recent state of European standardization of fasteners by including: a) a list of DIN EN Standards classified by subject, and the correlated DIN Standards a […]
DIN
DIN 440
2001
English

Washers with square hole for use in timber constructions

This standard specifies dimensions and technical delivery conditions for washers with square hole, with extra large outside diameter, of product grade C, designed for use with bolt/nut asse […]
DIN
DIN 267-4
1983
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Festigkeitsklassen für Muttern (bisherige Klassen)

Im Jahre 1967 wurde die Norm DIN 267 Teil 4 auf internationale Festigkeitsklassen für Muttern umgestellt. Die alten Kennzeichen 4D, 5D, 5S, 6G, 6S und 8G wurden durch die Kennzahlen 4, 5, 6 […]
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination […]
DIN
DIN 7964
1990
English

Reduced shank bolts and screws with coarse thread

This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the […]
DIN
DIN 440
1990
English

Washers for use in timber constructions

This standard specifies requirements for product grade C washers with a larger outside diameter. Such washers may be provided with a round hole (type R) for M5 to M52 bolts or a square hole […]