Abstract of ASTM F1136

CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS

English 1993
0.000
ASTM
Detailed Information

1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners.
1.2 These coatings are applied by conventional dip-spin or dip·drain methods.
1.3 The coating process does not induce hydrogen embrittlement, providing that the fasteners have not been pretreated with an acid.

Download File
(Log in to download spec.)

Check out other specifications

ANSI
ANSI B18.22M
1990
English

METRIC PLAIN WASHERS

This standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications. The inclus […]
DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
DIN
DIN 553
1986
English

Slotted set screws with cone point (modified version of ISO 7434, 1983 edition )

This standard specifies the characteristics of M 1 to M 12 slotted set screws with cone point, assigned to product grade A. Where, for special purposes, the screws are to meet requirements […]
ISO
ISO 8676
1988
English

Hexagon head screws with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread d […]
NASM
NASM 51959
1999
English

SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82°, CROSS-RECESSED, CORROSION-RESISTANT STEEL, UNC-2A

MATERIAL: AUSTENITIC CORROSION-RESISTANT STEEL SCREWS SHALL BE MANUFACTURED FROM TYPE 302 (UNS S30200), TYPE 304 (UNS S30400). TYPE 304L (UNS S30403). TYPE 305 (UNS S30500), TYPE 316 (UNS 5 […]
ISO
ISO 3800
1993
English

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless o […]
DIN
DIN 580
1972
English

Lifting Eye Bolts

The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new ed […]
JIS
JIS B 0147
2004
English

Blind rivets—Terminology and definitions

This Standard specifies the terminology and definitions for types, performance characteristics and geometry for blind rivets and the terminology for blind rivet setting and setting equipmen […]
JIS
JIS B 0255
1998
English

Limit gauges for unified screw threads

This Japanese Industrial Standard specifies the limit gauges to be used for the dimensional inspection of metric screw threads specified in JIS B 0210 and JIS B 0212 (hereafter referred to […]