Abstract of ASTM F468

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE

English 2001
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.
1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by ASTM F467, for Nonferrous Nuts for General Use, page B-184.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7331
1993
English

Compression rivets

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal compression rivets. Such rivets consist of two tubular parts, one of which is provided w [...]
JIS
JIS B 1009
1991
English

Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts

This Japanese Industrial Standard specifies nominal lengths to be applied to external thread parts of bolts, machine screws, etc. to be used generally and thread lengths for general purpose bol [...]
ISO
ISO 965-1
1980
English

ISO general purpose metric screw threads – Tolerances – Part 1 : Principles and basic data

This International Standard specifies a tolerance system for screw threads conforming to ISO 261, ISO general purpose metric screw threads - General plan. The tolerance system refers to the bas [...]
DIN EN
DIN EN 28751
1992
English

Coiled, light duty spring-type straight pins (ISO 8751 : 1987) English version of DIN EN 28 751

This International Standard specifies the characteristics of light duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 8 mm inclusive.
IFI
IFI-114
2008
English

BREAK MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel blind rivets suitable for use in joining the component parts of an assembly. A m [...]
JIS
JIS B 1126
1995
English

Hexagon washer head tapping screws

This Standard specifies hexagon washer head tapping screws with threads from ST2.2 up to and including ST8.
DIN
DIN 7999
1983
English

High strength hexagon fit bolts with large widths across flats for structural steel bolting

This standard specifies high strength hexagon fit bolts with large widths across flats. Fit bolts are intended for use in structural steel bolting (GVP bolting or SLP bolting). They may only be [...]
ASME
ASME B18.2.9
2010
English

STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS

1 SCOPE This Standard describes a gage and procedure for checking bolt or screw straightness at maximum material condition (MMC) and provides default limits when not stated in the applicable pr [...]
ASTM
ASTM A574
2008
English

ALLOY STEEL SOCKET-HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. 1.2 The va [...]