Abstract of ASTM F812/F812M

SURFACE DISCONTINUITIES OF NUTS

English 2007
0.000
ASTM
Detailed Information

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of inch-series nuts with nominal diameters 1/4 in. and larger.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0254
1985
English

Screw thread limit gauges for parallel pipe threads

This Japanese Industrial Standard specifies the limit gauges, hereinafter referred to as the "limit gauges for screw threads", to be used for dimensional inspection of parallel pipe threads (G) [...]
DIN EN
DIN EN 28735
1992
English

Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735

This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm [...]
DIN
DIN 268
1974
German

Tangentkeile und Tangentkeilnuten für stoßartige Wechselbeanspruchungen

Die vorliegende Norm entspricht sachlich dem ISO-Entwurf ISO/DIS 3117 -1973 Tangential keying Clavetage par clavettes tangentielles Tangentkeile und Tangentkeilnuten Dieser ISO-Entwurf enthält [...]
BS EN
BS EN 14399-1
2015
English

High-strength structural bolting assemblies for preloading Part 1: General requirements

This European Standard specifies the general requirements for bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading. The intended use of bolting [...]
JIS
JIS B 1054-1
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 1 : Bolts, screws and studs

This part of JIS B 1054 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested ov [...]
DIN
DIN 13-13
1983
English

ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes

This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maximum d [...]
DIN
DIN 926
1986
English

Slotted set screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
ISO
ISO 4753
1983
English

Fasteners – Ends of parts with external metric ISO thread

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise specified [...]
ASME
ASME B18.5
2008
English

ROUND HEAD BOLTS (INCH SERIES)

1.1.1 This Standard covers the complete general and dimensional data for the various types of inch series bolts generally classified as round head bolts and recognized as American National Stan [...]