Abstract of ASTM F835

ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

English 2000
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 in. thread sizes and flat countersunk (SFHCS) 0.060 through 1.5 in. thread sizes head cap screws having material properties for high strength requirements.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
DIN
DIN 7982
1984
English

Cross recessed countersunk head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply […]
DIN
DIN 557
1994
English

Product grade C square nuts

This standard specifies requirements for M 10 to M 12 square nuts assigned to product grade C. See DIN 962 (or the standards referred to therein) for special nut types or finishes. If, in s […]
DIN
DIN 960
1970
German

Sechskantschrauben – Metrisches Feingewinde – Ausführung m und mg

Eingeklammerte Größen sind möglichst zu vermeiden. Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen noch DIN 267
DIN
DIN 1449
1970
English

Conical shaft ends with internal thread – Dimensions

This standard specifies dimensions for the conical shaft ends with internal thread which are intended to accommodate belt pulleys, couplings and gears. See DIN 1448-1 for conical shaft end […]
DIN
DIN 7331
1993
English

Compression rivets

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal compression rivets. Such rivets consist of two tubular parts, one of which is provid […]
NASM
NASM 51958
1999
English

SCREW, MACHINE PAN-HEAD, CROSS-RECESSED, CORROSION RESISTING STEEL, UNF-2A

MATERIAL: STEEL, CORROSION-RESISTING, 300 SERIES AS SPECIFIED IN QQ-S-763 AND FED-STD-66, COMPOSITION 304 OR 316 OR EQUAL TO OR INTERCHANGEABLE WITH 16:18 OR 18:8 CHROMIUM-NICKEL ALLOY STEEL
SAE
SAE J121M
1996
English

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and simi […]
Custom
John Deere | JDM F25
2022
English

Specification for Zinc Flake Coatings for Bolted Joints

1.1 JDM F25 specifies requirements for black color appearance, hexavalent chromium-free zinc flake coatings with a 0.09-0.16 coefficient of friction (CoF) requirement. Two levels of corrosi […]