Abstract of ASTM F880

STAINLESS STEEL SOCKET SET SCREWS

English 2002
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SSS). sizes 0.060 through 0.500 in. in two conditions, AF and CW.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM A574
2000
English

ALLOY STEEL SOCKET HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1 […]
DIN
DIN 6922
1983
English

Hexagon flange bolts with reduced shank

This standard specifies product grade A hexagon flange bolts with metric coarse screw thread or metric fine screw thread from 5 up to and including 20 mm nominal thread diameter. If, in spe […]
DIN
DIN 127
1987
English

Spring lock washers with square ends or tang ends

Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO […]
DIN
DIN 7984
1985
English

Hexagon socket thin head cap screws

This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to […]
DIN
DIN 7996
1986
English

Cross recessed pan head wood screws

As a departure from DIN 7996, March 1975 edition (which was withdrawn in December 1984), the present edition specifies a second type of cross recess, viz. cross recess type Z, also referred […]
ISO
ISO 1479
1983
English

Hexagon head tapping screws

This International Standard specifies the characteristics of hexagon head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
DIN
DIN 918 Supplement 3
1999
English

Overview of European Standards for fasteners

This Supplement provides information relating to DIN 918 but no additional standard specifications.
DIN
DIN 611
1990
English

Overview of standards for rolling bearings

This standard provides an overview of DIN Standards dealing with rolling bearings and related International Standards.
DIN
DIN 6331
1991
English

Hexagon collar nuts with a height of 1,5 d

This standard specifies hexagon nuts designed for use without washers, in assemblies that will be frequently disassembled and reassembled.