Abstract of ASTM F912

ALLOY STEEL SOCKET SET SCREWS

English 2000
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) 0.060 thru 2.000 in. sizes having hardnesses 45 to 53 HRC.
1.2 These set screws are intended for compression applications only and are not customarily subjected to embrittlement tests. For tensile applications, consult with the manufacturer for proper alloy and hardness.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1129
2004
English

Tapping screw washer assemblies with plain washers

This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in accordance with JIS B 1055. The plain washers are captive, i.e. prevented from disassembly and free to rotate.
ISO
ISO 2342
1972
English

Slotted headless screws – Metric series

This International Standard specifies the dimensions of slotted headless screws of the metric series.
ISO
ISO 5864
1978
English

ISO inch screw threads – Allowances and tolerances

This International Standard specifies a system of allowances and tolerances for standard thread series, covering the range of diameters from 0.06 to 6 in, and pitches from 80 to 4 threads per inch.
DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
DIN
DIN 76-1
2004
English

Thread run-outs and thread undercuts for ISO metric threads as in DIN 13-1

This standard specifies dimensions for thread run-outs and thread undercuts for bolts, screws and similar components with external or internal ISO metric (coarse or fine pitch) thread as in DIN 13-1 and DIN ISO 261.
DIN
DIN 608
1981
English

Flat countersunk square neck bolts with short square

This standard specifies flat countersunk square neck bolt with short square, with metric threads M 10 and M 12, of product grade C.